Answer

Mar 01, 2025 - 02:00 AM
To connect and set up the VigilLink VLMX-1616E Matrix with Video Wall, please follow these steps:
1. Connect the HDMI input sources (such as DVDs or set-top boxes) to the HDMI input ports (1-16) on the rear panel of the Matrix using HDMI cables.
2. Connect the HDMI output displays (such as TVs or monitors) to the HDMI output ports (1-16) on the rear panel of the Matrix using HDMI cables.
3. Connect the coaxial audio output ports (1-16) on the rear panel of the Matrix to audio output devices (such as an audio amplifier) using coaxial cables.
4. Connect the TCP/IP control port on the rear panel of the Matrix to a PC or router using an RJ45 cable.
5. Connect the RS-232 control port on the rear panel of the Matrix to a PC or control system using a D-Sub 9-pin cable.
6. Connect the DC 24V power adapter to the DC 24V port on the rear panel of the Matrix.
7. Connect the grounding wire to the GND port on the rear panel of the Matrix.
8. Power on the Matrix by pressing the power button on the front panel. The power LED will illuminate in green.
9. Use the front panel buttons, IR remote, RS-232, LAN, or Web GUI to control and configure the Matrix according to your requirements.
Please refer to the user manual for more detailed instructions and information on configuring specific settings, such as EDID management, video and audio settings, CEC control, and network settings.
Add New Comment