User Manual Q&AAnswer
Mar 01, 2025 - 01:52 AM
To set the DMX address for the AUDIBAX Waco Prolife 300T Lighting System, follow these steps:
1. Press the MENU button on the fixture to enter the main menu interface.
2. Use the UP or DOWN button to select the Addressing menu and press ENTER.
3. In the Addressing menu, select the Mode submenu.
4. Choose either the 2 Channels Mode or 5 Channels Mode, depending on your desired control configuration.
5. Set the DMX address by adjusting the channel number using the rotary xxxx or buttons on the fixture.
- In the 2 Channels Mode, the DMX address controls the dimmer and color temperature functions.
- In the 5 Channels Mode, the DMX address controls the dimmer, strobe, warm white, cold white, and color temperature functions.
Note: Each fixture should be assigned a unique DMX address to ensure that the control signals are correctly received. You can set the same address for multiple fixtures if you want them to respond to the same control signal.
Please refer to the AUDIBAX Waco Prolife 300T Lighting System user manual for more detailed instructions and information on the DMX protocol and control options.
Add New Comment