Answer

Mar 01, 2025 - 01:49 AM
To install the steering rollers on the Kärcher WD 4 S Wet and Dry Vacuum Cleaner, follow these steps:
1. Before initial startup, remove the contents from the container.
2. Mount the steering rollers on the bottom of the device. Refer to Illustration B, C, and D in the instruction manual for visual guidance.
Note: If your model has stainless steel tubes, remove the protective cover before installing the steering rollers.
By properly installing the steering rollers, you will ensure smooth movement and maneuverability of the vacuum cleaner during operation.
Add New Comment