How do I set up and use the WINNCARE Mangar Handy Pillow Lift? (WINNCARE Mangar Handy Pillow Lift Instructions Manual)

Answer

manuals.plus

Mar 01, 2025 - 01:47 AM

To set up and use the WINNCARE Mangar Handy Pillow Lift, follow these steps:

1. Fit the spreader bar through the pocket on the base of the Handy Pillow Lift.
2. Decide where you want to place the compressor and lead the air hose to that side of the bed. If the hose is on the left side of the bed, pass it through the two holes indicated.
3. Remove the pillows from the bed and place the Handy Pillow Lift on the bed with the spreader bar against the headboard. Fold the strut towards the headboard.
4. Connect the air hose from the Handy Pillow Lift to the Airflo 12 air outlet socket.
5. Connect the push button hand control to the hand control socket.
6. Place the Airflo 12 compressor by the side or under the bed in an out-of-the-way position.
7. Partially inflate the Handy Pillow Lift by pressing the 'Up' button on the hand control.
8. Fit the quilt to the Handy Pillow Lift by inserting the top and bottom of the Handy Pillow Lift into the pockets at the top and bottom of the quilt.
9. Fit the cover over the quilt, ensuring that the flap is positioned at the top. Wrap the flap completely around the pillow to hold it in place.
10. To raise the Handy Pillow Lift, press the 'Up' button on the hand control. Release the button to stop at any point.
11. To lower the Handy Pillow Lift, press the 'Down' button on the hand control.

Please refer to the WINNCARE Mangar Handy Pillow Lift user instructions for more detailed information on setup, operation, cleaning, disinfecting, storage, maintenance, and warranty.