User Manual Q&AAnswer
Mar 01, 2025 - 01:37 AM
To install the 70mai A810 Series 4K Dash Cam, follow these steps:
1. Installing the electrostatic sticker:
- Clean and dry the front windshield.
- Paste the electrostatic sticker on the recommended area, avoiding the windshield's edge.
- Press the sticker to remove air bubbles and ensure adhesion.
2. Installing the mount:
- Attach the mount into the mount slot on the dash cam.
- Slide the mount up until it locks into place.
3. Installing the memory card:
- Insert a standard MicroSD card with a minimum capacity of 32GB and a rating of U3 (UHS-3) or above into the card slot.
4. Mounting the dash cam:
- Paste the dash cam onto the electrostatic sticker.
5. Routing cable:
- Route the power cord to the cigarette lighter socket in your vehicle and connect it.
Note: Use the included wiring trim tool to hide the power cord underneath the vehicle's headliner and rubber seal along the A-pillar for a neat installation.
For more detailed instructions and illustrations, please refer to the user manual provided with the product.
Add New Comment