User Manual Q&AAnswer
Mar 01, 2025 - 01:29 AM
To connect the PAPIFEED PF035 Pet Smart Camera to the "Smart Life" app, please follow these steps:
1. Download the "Smart Life" app by scanning the provided QR code or searching for it in the app store (available for Android or iOS devices).
2. Make sure that your phone's Bluetooth and Wi-Fi are turned on before adding the device.
3. Power on the camera and wait for about 15 seconds until you hear a "ding xxxx ding xxxx " sound and the camera rotates. This indicates that the self-check is complete.
4. Open the "Smart Life" app and click on the [O] icon in the upper right corner.
5. Select "Add devices" and choose either "Smart Security Monitoring Smart Camera (WiFi)" or "Smart Camera (Dual-Band Wi-Fi)" depending on your camera model.
6. Enter your Wi-Fi account and password. Please note that the device only supports 2.4GHz Wi-Fi.
7. Hold your phone's QR code facing the camera, keeping a distance of 15-20cm. Move slowly from near to far until you hear a "drop" sound, indicating a successful scan.
8. Select "I Heard a Prompt" to start searching for the device. Once the device is found, it will be successfully added to the app.
9. If you need to reconnect the device with another phone, you can reset the network by long-pressing the reset button for about 15 seconds until you hear a long "drop" sound. Then, wait for the camera to rotate and enter the waiting network state to reconnect.
Note: The steps may vary slightly depending on the version of the "Smart Life" app. Please refer to the current app guidelines for accurate instructions.
Add New Comment