User Manual Q&AAnswer
Mar 01, 2025 - 01:29 AM
Sure! Here are the step-by-step instructions for installing the Summit CR2B228T 18 Inch Electric Radiant Cooktop:
1. Before using your new cooktop, carefully review the user manual and remove any protective film that may still be on the cooktop.
2. Plan ahead for the installation by considering the dimensions and requirements listed in the manual. Ensure that you have the necessary clearances and ventilation for proper operation.
3. Make the necessary cutout in your countertop according to the dimensions provided in the manual. Ensure that the minimum flat countertop surface is equal to or greater than the overall cooktop dimensions.
4. Provide adequate ventilation for the cooktop by allowing a 2" minimum clearance between the bottom of the cooktop and any combustible surface located below. Install a range hood that projects horizontally a minimum of 5" beyond the bottom of the cabinets to reduce the risk of burns from reaching over heated surface units.
5. Stretch out the supplied seal along the underside edge of the cooktop, ensuring the ends overlap at the corners. Do not use adhesive to fix the cooktop into the worktop.
6. Position the cooktop into the cutout in the worktop, applying gentle downward pressure to push it into the worktop and ensure a good seal around the outer edge.
7. The cooktop must be installed by qualified personnel or technicians. Do not attempt installation by yourself.
8. Ensure that the cooktop is not installed above a dishwasher, fridge, freezer, washing machine, or clothes dryer, as the humidity may damage the cooktop's electronics.
9. The ceramic cooktop should be installed to ensure better heat radiation and reliability. The wall and induced heating zone above the table surface should be able to withstand heat, and the sandwich layer and adhesive must be resistant to heat.
10. Connect the cooktop to the power supply by following the provided instructions in the manual. Use only 3-conductor UL listed cord rated at 20 amps with a minimum voltage range of 240V. Ensure proper grounding and consult a qualified technician if needed.
11. After installation, review the user manual for operating instructions and safety precautions to ensure proper usage of the cooktop.
Please note that these are general installation instructions, and it is always recommended to refer to the specific instructions provided in the user manual for your model.
Add New Comment