User Manual Q&AAnswer
Mar 01, 2025 - 12:49 AM
To mount the ROCKVILLE HP4S speakers, follow these steps:
1. Use the included mounting template to mark the location of the mounting screws. Ensure that the template is level and square with its surroundings.
2. Once the template is level, mark the location of the two xxxx holes. It is important to use all the xxxx holes to securely attach the speaker bracket to the mounting surface.
3. Remove the template and drill holes where your marks are. If you are unable to drill into a stud, use anchors for added support.
4. Gently pull the speaker wire through the large circular hole in the middle of the bracket.
5. Place the bracket against the mounting surface, aligning the holes. Use the included hardware to attach the bracket to the mounting surface.
6. Mount the speaker to the bracket and tighten the mounting knobs. Do not tighten completely. Check to ensure the speaker is in phase and functioning correctly. Angle the speaker to the desired position.
7. Hand tighten the bracket knobs. Avoid using power tools as they may over tighten the knobs and strip the threads of the insert. Double-check the installation to ensure it is safe and secure.
For further assistance or technical support, you can contact the Rockville technical help line at 1-646-758-0144, available 24 hours a day, 7 days a week.
Add New Comment