Answer

Mar 01, 2025 - 12:48 AM
Sure! Here are the step-by-step instructions for setting up and operating the ADJ MISTER KOOL II Low-lying Dry Ice Effect Fog Machine:
1. Unpacking: Carefully remove the unit from the shipping carton and check for any damage. If there is any damage or missing parts, contact customer support.
2. Set-Up: Place the machine on a flat, dry surface and unscrew the xxxx on the top of the unit. Open the top and fill the inside with ice. Remove the reservoir cap located on the top of the machine and fill the reservoir with American DJ brand fog juice only. Replace the cap. Insert the water tube into the water bag. When the ice melts, the water will empty into the bag.
3. Remote Control: Attach the remote control to the remote control socket located on the rear of the unit.
4. Power On: Plug the unit into a matching power supply and flip the power switch to the on position.
5. Warm Up: Allow the unit to warm up for 3 minutes.
6. Operating Instructions: The unit can be operated manually or by timer using the remote control.
- Continuous Operation: Press the red Continuous button on the remote control to activate continuous output. Fog will continue to emit as long as the button is pushed in.
- Manual Operation: Press the green button on the remote control to control the fog emission manually. Fog will emit as long as the button is pushed.
- Timer Operation: Press the yellow timer button on the remote control to activate the timer function. The "duration" xxxx controls the length of the fog burst, and the "interval" xxxx controls the time between bursts. Turning these knobs clockwise increases their values, while turning them counterclockwise decreases their values.
7. Troubleshooting: If you experience low fog output, pump noise, or no fog output at all, disconnect and discontinue use immediately. Check the fluid level, external fuse or breaker, remote connection, and power supply. If the unit still fails to operate correctly, contact customer support for further instructions.
Please note that these instructions are a summary and it is important to refer to the complete instruction manual for detailed information and safety precautions.
Add New Comment