User Manual Q&AAnswer
Mar 01, 2025 - 12:46 AM
Step 1: Mount the Energizer
- Choose a suitable location for the energizer, preferably indoors and out of reach of children.
- Using the provided template as a drilling guide, drill two 4mm (5/32") holes 176mm apart.
- Insert the provided screws into the holes, leaving the heads about 3mm (1/8") out from the wall.
- Slide the energizer onto the mounting screws.
Step 2: Install the Earth System
- Install the earth system at least 10m (33ft) away from any power supply earth peg, underground telephone, or power cable.
- Drive one 2m (6ft) earth stake into the ground, leaving 5cm (2") above the ground.
Step 3: Connect the Fence
- Connect the red (FENCE) terminal of the energizer to the fence using double insulated cable.
- Remove 5cm (2") of plastic coating from one end of the cable and bend the wire to form a loop.
- Unscrew the red (FENCE) terminal, insert the loop of wire, and xxxx the terminal closed to firmly clamp the wire.
- Attach the other end of the cable to the fence using a joint clamp.
Step 4: Plug in the Energizer
- Check that the light on the front of the energizer is flashing.
- Plug the energizer into a power outlet.
Please note that these instructions are a summary and it is important to refer to the complete user manual provided with the Gallagher M350, M550, or M650 Mid Value Mains Fence Energizer for detailed installation guidelines and safety precautions.
Add New Comment