How do I install the MEMPHIS MXAUSBA Rocker Switch AUX and USB Inputs? (Memphis Rocker Switch AUX and USB Inputs Instructions Manual)

Answer

manuals.plus

Mar 01, 2025 - 12:41 AM

To install the MEMPHIS MXAUSBA Rocker Switch AUX and USB Inputs, please follow these steps:

1. Identify a suitable location: The MXAUSBA unit is designed to fit into standard Carling/Rocker switch locations. Choose a location in your vehicle where you want to install the unit.

2. Prepare the installation area: Ensure that the installation area is clean and free from any debris or obstructions.

3. Connect the USB and AUX cables: The MXAUSBA unit comes with a 1-meter USB cable and a 1-meter RCA cable. Connect the male USB connector of the USB cable to the female USB connector on the front panel of the MXAUSBA unit. Connect the male RCA connector of the RCA cable to the 3.5mm AUX female connector on the front panel of the MXAUSBA unit.

4. Route the cables: Carefully route the USB and AUX cables to your source unit's 3.5mm/USB cables. Make sure to avoid any sharp edges or moving parts that could damage the cables.

5. Mount the MXAUSBA unit: Using the provided mounting dimensions (22.5mm x 37mm), mark the location where you want to mount the MXAUSBA unit. Drill appropriate holes and secure the unit in place.

6. Test the installation: Once the unit is securely mounted, connect the other ends of the USB and AUX cables to your source unit's corresponding ports. Test the functionality of the MXAUSBA unit by playing audio through the AUX input and connecting a USB device to the USB input.

For further assistance or visual instructions, you can visit the MEMPHIS Car Audio website at www.memphiscaraudio.usa or refer to the instruction manual provided with the product.