User Manual Q&AAnswer
Mar 01, 2025 - 12:20 AM
To select the output voltage for the AL600ULXD power supply charger, you need to adjust the switch position on the unit. Here are the steps:
1. Locate the switch labeled "SW1" on the power supply board.
2. If you want a 12VDC output, switch SW1 should be in the ON position.
3. If you want a 24VDC output, switch SW1 should be in the OFF position.
Make sure to set the switch to the desired position before connecting any devices to the power supply.
Add New Comment