Answer

Mar 01, 2025 - 12:16 AM
To adjust the gain settings on the Unication B1-S-A01 One Way Signal Booster, you can use the "Gain Switch" located on the interface. The gain switch allows you to switch between high and low gain settings to optimize the signal amplification based on your frequency band(s) and desired coverage area.
Here is how you can configure the gain switch:
1. After installation, locate the gain switch on the booster's interface.
2. Refer to the "Booster High/Low Gain Switch Diagram" in the user guide.
3. The diagram shows the available switch positions for low and high-power gain in supported frequencies.
4. To expand the indoor signal coverage area, position the switch to the high-power gain setting.
5. However, if you experience a decrease in the receiving range or encounter signal interference in the area, it is recommended to switch to the low gain setting.
6. Adjust the gain switch according to your specific requirements and frequency band(s).
Please note that the gain switch configuration may vary depending on your specific frequency band(s) and desired coverage area. It is important to refer to the user guide and follow the instructions provided for your specific use case.
For further assistance or more information about the Unication B1-S-A01 One Way Signal Booster, you can visit the manufacturer's website at www.unicationusa.com/one-way-signal-b... or contact Unication by email at info@unication.com.
Add New Comment