How do I install the artika OUT-EVC-BL LED Wall Light? (artika OUT-EVC-BL LED Wall Light Instruction Manual)

Answer

manuals.plus

Mar 01, 2025 - 12:14 AM


Here is a step-by-step installation guide for the artika OUT-EVC-BL LED Wall Light:

1. Before starting the installation, make sure to turn off the breaker at the panel to avoid the risk of electrical shock. Switch off the main electrical supply from the fuse box or circuit breaker.

2. Ensure that you have the necessary tools for installation, including a screwdriver and sealant.

3. If you plan to use a dimmer, make sure it is LED compatible.

4. The minimum clearance for installation should be planned according to your desired height.

5. Start by installing the mounting bracket. Follow the instructions provided in the manual for proper installation.

6. Connect the wires according to the wire connector instructions provided in the manual.

7. If your light fixture has tunable white technology (CCT), follow the instructions provided in the manual to adjust the color temperature.

8. Install the light fixture onto the mounting bracket.

9. Apply sealant around the fixture, ensuring to keep the bottom unsealed to allow for drainage in case of water infiltration.

10. Follow any additional instructions or warnings provided in the manual, such as FCC compliance and warranty information.

Please note that it is recommended to have this product installed by a certified electrician, especially if it is required by the electrical and building codes in your region. Improper installation may void the warranty and can lead to product malfunction or other problems.