User Manual Q&AAnswer
Mar 01, 2025 - 12:10 AM
To install the LUMASCAPE LS2012 Centria C1 Foundation Compact and Versatile Stake Mount Spotlight, please follow these steps:
1. Ensure that the installation complies with local electrical rules and regulations. All electrical work must be performed by a licensed electrician.
2. Before starting the installation, make sure to read and follow all safety instructions provided in the manual. Failure to do so may void the warranty.
3. The luminaire should only be used complete with a protective shield. If the protective shield is cracked, immediately stop using the luminaire. Isolate the light source, keep it dry, and contact Lunarscape for a replacement.
4. If the external flexible cable or cord of the luminaire is damaged, it should be replaced exclusively by Lunarscape or their service agent to avoid any hazards.
5. The light source contained in the luminaire should only be replaced by Lunarscape or their service agent.
6. Position the luminaire in a suitable location, taking care not to mount it in a place where it may become hot. The luminaire may become hot during operation.
7. Ensure that the mains input power is surge protected and that connections are kept clean and dry at all times.
8. Do not make modifications or alter the product in any way, as this may void the warranty.
9. Keep the luminaire clean and free of debris. Only clean it with warm water and avoid using chemicals or abrasives.
10. The luminaire is suitable for use indoors or outdoors.
Please refer to the included assembly instructions and wiring designations for further details on the installation process.
Note: It is always recommended to consult the product manual for specific installation instructions and guidelines.
Add New Comment