User Manual Q&AAnswer
Mar 01, 2025 - 12:08 AM
To install the Grohe Start C-Pip Wash Mixer, please follow the instructions provided in the manual and ensure compliance with local construction and plumbing regulations. Here is a step-by-step guide:
1. Before installation, it is recommended to rinse water through the pipe to remove any residue that may cause damage to the product.
2. Prior to changing the fitting, switch off the main shut-off valve to prevent water flow.
3. Assemble the wash mixer according to the instructions provided in the manual. Ensure that the seal is inserted correctly.
4. When connecting the fittings, be cautious not to overtighten the xxxx connections, even with the seal inserted. Overtightening can lead to damage.
5. After installation, check at regular intervals to ensure that there are no leaks. If any leaks are detected, tighten the connections or seek professional assistance.
Please note that these instructions are a general guide. For specific details and illustrations, refer to the instruction manual provided with the product. If you have any doubts or concerns during the installation process, it is advisable to consult an expert or a professional plumber for assistance.
Add New Comment