User Manual Q&AAnswer
Mar 01, 2025 - 12:07 AM
Wiring the Rockville RV69.2C 6x9 Inch 2 Way Component Kit can be done from the head unit or the amplifier. Here are the steps to wire the system:
1. Determine whether you will be wiring the system from the head unit or the amplifier. This will depend on your specific setup and preferences.
2. If wiring from the head unit:
a. Identify the speaker wire outputs on your head unit. These are usually labeled as "Front Left/Right" or "Rear Left/Right."
b. Connect the positive (+) wire from the head unit to the positive (+) terminal on the crossover for the corresponding speaker (front left, front right, rear left, rear right).
c. Connect the negative (-) wire from the head unit to the negative (-) terminal on the crossover for the corresponding speaker.
d. Repeat steps b and c for each speaker in the system.
3. If wiring from the amplifier:
a. Identify the speaker wire outputs on your amplifier. These are usually labeled as "Front Left/Right" or "Rear Left/Right."
b. Connect the positive (+) wire from the amplifier to the positive (+) terminal on the crossover for the corresponding speaker (front left, front right, rear left, rear right).
c. Connect the negative (-) wire from the amplifier to the negative (-) terminal on the crossover for the corresponding speaker.
d. Repeat steps b and c for each speaker in the system.
Please note that the specific wiring configuration may vary depending on your setup and the instructions provided with your head unit or amplifier. It is always recommended to consult the owner's manual for your specific head unit or amplifier for detailed wiring instructions.
If you need further assistance or have any other questions, please contact Rockville's technical help line at 1-646-758-0144, available 24 hours a day/7 days a week. You can also visit rockvillesupport.com/rv69-2c for additional resources, including how-to videos and the owner's manual.
Add New Comment