User Manual Q&AAnswer
Feb 28, 2025 - 11:56 PM
To assemble the SUNJOE SWD6600-RM Electric Wet Dry Vacuum Cleaner, follow these steps:
1. Attach the caster wheels: Turn the dust tank upside down and insert the two caster wheels into the holes at the bottom of the base. Press the wheels down firmly to secure them.
2. Install the large wheels: Place the two large wheels in the correct positions as shown in the manual. Fix them into place with two screws each.
3. Connect the suction hose: Depress the locking button on the air inlet and insert the hose connector. Push firmly to secure it.
4. Attach the extension tubes: If needed, take the slightly narrowed end of the first extension tube and insert it into the attachment handle. Press firmly to secure. Repeat the same process for the second tube.
5. Connect the desired accessory: Select the desired brush attachment and connect it to the end of the extension tube or directly to the attachment handle. Press firmly to lock it securely.
Your SUNJOE SWD6600-RM Electric Wet Dry Vacuum Cleaner is now assembled and ready for use. Make sure to read the safety instructions in the manual before operating the vacuum cleaner.
Add New Comment