How do I install the Superior Life NovaLux LED Linear High Bay Light? (Superior Life NOVALUX 150W 2 ft LED Linear High Bay Light Instruction Manual)

Answer

manuals.plus

Feb 28, 2025 - 11:53 PM

To install the Superior Life NovaLux 55536 150W 2 ft LED Linear High Bay Light, please follow these steps:

1. Before installation, it is recommended to consult a qualified licensed electrician and check your local electrical code.
2. Turn off the electrical power at the fuse or circuit breaker box before wiring the fixture to the power supply.
3. Inspect the new LED fixture for any damages and handle it with care.
4. For standard chain mount installation, install the chain into the provided wire hanger. Secure the other end of the chain to a structure using hardware rated for the load. Install the wire hanger on the side of the top LED channel. Make sure the wiring hangers are fully engaged into the side holes on the top channel.
5. Connect the LED high bay wiring to the line voltage wire: black to hot, white to neutral, and green to ground. Use only UL listed wiring.
6. If you have a 0-10V dimming circuit, there are purple and pink (or gray*) wires inside the driver compartment that are 0-10V dimming leads. Connect them to the dimming low voltage wiring. If you are not connecting the fixture to a 0-10V dimming circuit, make sure to cap off the fixture dimmer leads separately from each other to avoid improper fixture operation.
7. Clean any residues or fingerprints from the new LED high bay and lens.
8. Double-check all hanging hardware before proceeding with the installation.

Please note that these instructions are a summary. For more detailed instructions and additional mounting options, refer to the instruction manual provided with the product. It is important to follow all warnings, cautions, and operating instructions to ensure safe installation and usage of the luminaire.