User Manual Q&AAnswer
Feb 28, 2025 - 11:42 PM
To install the Leonton EG5-1802-SFP Series 18-Port Industrial Gigabit Ethernet Switch, follow these steps:
1. Unpack the switch from the original packing box.
2. Check if the DIN-Rail bracket is screwed on the switch. If not, refer to the DIN-Rail Mounting section in the manual for installation instructions. If you want to wall mount the switch, refer to the Wall Mounting section.
3. Power on the switch and ensure that the power LED light turns on. If you need help with wiring the power inputs, refer to the Wiring the Power Inputs section.
4. Prepare a twisted-pair, straight-through category 5 cable for Ethernet connection.
5. Insert one side of the RJ-45 cable into the switch's Ethernet port and the other side into the networking device's Ethernet port (e.g., switch, PC, or server). The Ethernet port's LED on the switch will turn on when the cable is connected to the networking device.
6. Check the LED indicators to ensure they show normal status. Refer to the LED Indicators section for LED light indication.
7. Once all connections are set and the LED lights show normal, the installation is complete.
For more detailed instructions and illustrations, please refer to the Installation Steps section in the user manual of the Leonton EG5-1802-SFP Series 18-Port Industrial Gigabit Ethernet Switch.
Add New Comment