Answer

Feb 28, 2025 - 11:42 PM
To install the FISHER PAYKEL DD60STX6HI1 FP BI Integrated Single DishDrawer Dishwasher, follow the instructions provided in the owner's manual. Here are the general steps:
1. Check the electrical requirements: The dishwasher operates on 220/240 VAC 50Hz power supply. Ensure that you have the appropriate electrical connection.
2. Prepare the cabinet space: Make sure the cabinet space is suitable for the dishwasher. Refer to the dimensions and installation requirements in the manual.
3. Connect the water supply: Connect the water inlet hose to the water supply using the provided clamp. Ensure that the water supply is turned off before making the connection.
4. Connect the drain hose: Connect the drain hose to the drain spigot connector. Make sure it is securely attached.
5. Secure the dishwasher: Use the provided installation tabs and screws to secure the dishwasher to the cabinet. Follow the instructions in the manual for proper placement and attachment.
6. Install front panels/controls: If applicable, install the front panels and controls according to the instructions in the manual. This step may vary depending on the specific model.
7. Test the dishwasher: Once the installation is complete, turn on the water supply and electrical power. Run a test cycle to ensure that the dishwasher is functioning properly.
For more detailed instructions and illustrations, refer to the owner's manual of the FISHER PAYKEL DD60STX6HI1 FP BI Integrated Single DishDrawer Dishwasher.
Add New Comment