Answer

Feb 28, 2025 - 11:36 PM
To change the lamp in your kaWe Otoscope Combi Light C10, please follow these steps:
1. For EUROLIGHT / COMBILIGHT models:
a. Remove the head from the handle by pressing the corrugated bushing down.
b. Pull the lamp from the bottom of the head.
c. Clean the bulb of the replacement lamp with alcohol, ensuring it is clean and free of fingerprints.
d. Push the lamp all the way into the head.
2. For PICCOLIGHT C:
a. Swing the magnifying glass up and grasp the adapter, then pull out the lamp.
b. Detach the lamp by unscrewing it from the adapter.
c. Clean the bulb of the replacement lamp with alcohol, ensuring it is clean and free of fingerprints.
d. xxxx the new lamp onto the adapter.
e. Push the lamp together with the adapter fully back into the slot.
3. For EUROLIGHT C / COMBILIGHT C:
a. Unscrew the lamp from the otoscope head.
b. Remove the black plastic bushing from the lamp carefully.
c. Clean the bulb of the replacement lamp with alcohol, ensuring it is clean and free of fingerprints.
d. xxxx a replacement lamp into the head and cover it with the plastic bushing.
Please note that it is important to use original kaWe replacement lamps for satisfactory operation and the best illumination power. If you have any further questions or need assistance, please contact your supplier or refer to the User Manual for more information.
Add New Comment