Answer

Feb 28, 2025 - 11:26 PM
To set up the ZTE E3330 Wi-Fi6 Wireless Router, follow these steps:
1. Download and install the ZLife Lite app from the App Store (for iOS) or Google Play (for Android).
2. Open the ZLife Lite app and tap on "Add device."
3. Select "Wi-Fi Router" from the options.
4. Connect the WAN port of the router to your broadband port.
5. Tap "Next" and scan the QR code found at the bottom of the router. If there is no QR code, enter your wireless account and password manually. Note: If you are using an Android device, you will need to connect to Wi-Fi manually after scanning the QR code. If you don't want to enter the password manually, you can tap "Copy the password."
6. After successfully adding the router, the "Configure network" screen will be displayed. Tap "Bind immediately." Once the router is successfully added, the indicator will turn green and steady.
7. For more advanced configurations, you can access the router management web page. The login address, default username, and password can be found on the label at the bottom of the router.
If you want to set up a mesh network with multiple E3330 routers, there are two methods:
Method 1: Use the ZLife Lite app for connection
1. Ensure that the router you have just configured is connected to the internet.
2. Power on the new router and follow the instructions provided by the ZLife Lite app.
3. Once the new router is connected to the existing router, the LED of the new router will turn solid blue.
Method 2: Use the WPS key for connection
1. Ensure that the router you have just configured is connected to the internet.
2. Place the new router close to the existing router and power it on.
3. Press the WPS buttons on both routers until the LEDs blink green. The time between pressing the two WPS buttons should be less than 1 minute.
4. The pairing process may take up to 2 minutes. When pairing is complete, the LED of the new router will turn solid blue.
5. You can now move the new router to your desired location.
If you encounter any issues, here are some troubleshooting steps:
1. If the power indicator on the front panel is off after pressing the power button, check that the power switch is turned on and that the power adapter is correctly connected to the device using the supplied adapter.
2. If you are unable to connect to the network, ensure that the Ethernet cable is correctly connected to the WAN interface and the LAN interface. Also, check that the WAN indicator on the front panel is on and the Internet indicator is solid green or flashing green.
3. If needed, you can restore the factory default settings by using a needle to press the reset button for over 5 seconds after the power is on.
For further assistance, you can refer to the ZTE E3330 Wi-Fi6 Wireless Router User Manual or contact ZTE customer support.
Add New Comment