How do I install iLOQ G50S.2x1 Cam Lock Cylinder? (iLOQ Cam Lock Cylinder Instruction Manual)

Answer

manuals.plus

Feb 28, 2025 - 11:18 PM

To install the iLOQ G50S.2x1 Cam Lock Cylinder, please follow these instructions:

1. Before installation, ensure that these instructions are carefully followed and passed on to the user.
2. The iLOQ G50S cylinders should be installed and used effortlessly without excessive force.
3. Do not modify the product except as described in the instructions.
4. Use the appropriate escutcheon and/or adapter type according to the installation environment. For Finnish installations, no adapters are needed. For other market areas, an adapter kit AG50.5 may be required due to pre-drilled assembly holes on the door.
5. Use reasonable force (approximately 8 Nm) when tightening the cylinder fixing nut.
6. Use reasonable force (approximately 8 Nm) when tightening the security nut.
7. Use reasonable force (approximately 3 Nm) when tightening the latch fixing.
8. Use the locking washer to secure the latch fixing nut once tightened.
9. Pay attention to the dimensions of the latch to ensure it is not under pressure when opening or closing the lock. If the latch is under pressure, it may prevent proper lock functioning and cause damage.

Please refer to the iLOQ G50S.2x1 Cam Lock Cylinder Instruction Manual for more detailed installation instructions and diagrams.

Note: It is important to ensure that any seals or weather-stripping fitted to the door assembly do not inhibit the correct operation of the cylinder. Additionally, before fitting the cylinder to a fire/smoke-resisting door, check the fire certification for conformity.