Answer

Feb 28, 2025 - 11:13 PM
To install the ASKO HSS1053T Hidden Helper between a washing machine and a dryer, follow these steps:
1. Undo the middle xxxx on the back side of the washing machine.
2. Attach the anti-tip bracket (B) to the upper edge of the back of the washing machine. The anti-tip bracket (B) is supplied in the hidden helper.
3. Attach the anti-tip bracket (A) to the lower edge of the back of the dryer. The anti-tip bracket (A) is supplied in the dryer cardboard box.
4. Before placing the dryer onto the hidden helper, undo the dryer legs by five turns from the fully retracted position, and tighten the safety nuts all the way.
5. Place the Hidden Helper and make sure it is aligned with WM (washing machine) or TD (tumble dryer). Lift the dryer and tilt it towards the back. Insert the back feet of the dryer into the slots in the hidden helper and push the dryer back towards the back of the hidden helper until the anti-tip bracket (A) locks in with the anti-tip bracket (B). Ensure that the brackets on the dryer and the washing machine are fully aligned.
6. Finalize the installation of the hidden helper between the washing machine and the dryer from the back.
Note: If you already have a stacked tower of a washing machine and a dryer, you will need to follow the instructions for dismounting the tower before installing the hidden helper.
For a more detailed explanation and visual representation, please refer to the ASKO HSS1053T Hidden Helpers Instruction Manual available on the ASKO website at www.asko.com.
Add New Comment