User Manual Q&AAnswer
Feb 28, 2025 - 11:13 PM
To charge the NOCO BOOST X GBX55, follow these steps:
1. Connect the GBX55 to a power source using the included USB-C Charge Cable. The USB-C IN/OUT port on the GBX55 supports Power Delivery 3.0 technology and can receive/deliver up to 60W of power.
2. The GBX55 comes partially charged, but it is recommended to fully charge it before use. The charge level of the internal battery is indicated by the charge LEDs. The LEDs will slowly pulse 'on' and 'off' and become solid until all four charge LEDs are on.
3. The time to recharge the GBX55 will vary depending on the discharge level and the power source used. Refer to the recharge time chart in the user manual for estimated charging times based on different charger ratings.
4. When the battery is fully charged, the green 100% LED will be solid, and the 25%, 50%, and 75% charge LEDs will turn off.
5. It is important to charge the GBX55 in a well-ventilated area and avoid using damaged cables or chargers. Using non-approved charging products may present electrical risks and can result in damage or injury.
For more detailed information and troubleshooting, refer to the user manual provided with the NOCO BOOST X GBX55.
Add New Comment