User Manual Q&AAnswer
Feb 28, 2025 - 11:04 PM
To operate the , please follow these steps:
1. Ensure that the appliance is connected to a single-phase AC supply of the voltage specified on the rating label.
2. Place the cooler in a well-ventilated area, keeping a distance of at least 20cm away from walls or corners to ensure proper air circulation.
3. Fill the water tank with clean water within the water level limits indicated by the water level indicator. Do not add water while the power is on.
4. Plug in the cooler and turn it on using the control buttons provided. Refer to the diagrammatical representation in the instruction manual for the location and functions of the control buttons.
5. Adjust the fan speed and cooling settings according to your preference.
6. Ensure that the air intakes and exhaust openings are not blocked in any manner.
7. When not in use, always turn the product to the OFF position and unplug it from the electrical outlet.
8. If you need to move the cooler while water is in the tank, unplug it and push it slowly and lightly on the side to avoid water spillage. Alternatively, you can drain the unit using the valve at the bottom.
9. For any further assistance or queries related to after-sales service, please contact the iBELL Customer Care Center mentioned in the instruction manual.
Please note that this is a general overview of the operating instructions. For detailed instructions and safety precautions, refer to the complete instruction manual provided with the product.
Add New Comment