User Manual Q&AAnswer
Feb 28, 2025 - 10:52 PM
To pair the integratech RF RGBW Remote Controller with an RF receiver, you have two methods:
Method 1:
1. Ensure that the RF receiver is in pairing mode.
2. Press and hold any of the zone buttons (1-6) on the remote controller for about 5 seconds until the corresponding zone LED indicator on the remote controller starts flashing.
3. Release the button and the pairing process will be completed.
Method 2:
1. Ensure that the RF receiver is in pairing mode.
2. Press and hold the "Zone On/Off" button on the remote controller for about 5 seconds until the zone LED indicator starts flashing.
3. Release the button and the pairing process will be completed.
Note: A receiver can be paired with a maximum of 8 different remote controllers.
For more detailed instructions and illustrations, please refer to the integratech RF RGBW Remote Controller manual.
Add New Comment