Answer

Feb 28, 2025 - 10:33 PM
To adjust the stroke rate on the HILTI WSR 36-A Cordless Reciprocating Saw, follow these steps:
1. Locate the stroke rate regulator on the tool. It is usually located near the grip or handle of the saw.
2. Turn the stroke rate regulator to the desired setting. The stroke rate can be adjusted between 0 strokes per minute and 2,850 strokes per minute.
3. Refer to the suggested stroke rate settings in the manual for different materials. For example, for cutting wood, a stroke rate setting of 5-6 is recommended, while for cutting steel, a setting of 2-3 is suggested.
4. Once you have set the desired stroke rate, press the control switch to start the saw at the preselected stroke rate.
Note: It is important to choose the appropriate stroke rate for the material you are cutting to ensure optimal performance and safety.
Add New Comment