User Manual Q&AAnswer
Feb 28, 2025 - 10:29 PM
To set the DMX512 address for the AUDIBAX Event 78 light, follow these steps:
1. Start the DMX512 console and wait for the LCD display console to complete initialization.
2. Press the "Program" key on the console until the top of the light starts flashing.
3. Press the button below channel 1 on the console. The indicator light for channel 1 will turn on.
4. The DMX512 console's address for the light is 10000000. Use the channel faders on the console to control the light.
5. Make sure the DIP switches on the light are set to the same DMX512 address as selected on the console.
6. The light will now be in DMX512 control mode and can be controlled by the console.
Please refer to the user manual for more detailed instructions and illustrations on setting the DMX512 address.
Add New Comment