User Manual Q&AAnswer
Feb 28, 2025 - 10:21 PM
To adjust the height of the workbench, follow these steps:
1. Make sure there are no obstacles in the desk's path and that the desktop is not touching any walls.
2. Ensure that all cords are of an appropriate length to accommodate the change in height.
3. Plug the Power Cord (P9) into a 110V-240V outlet.
4. Press and hold the DOWN button on the Switch (P7) until the desk reaches its lowest height.
5. Release the DOWN button.
6. Press and hold the DOWN button again until the LED display reads "RST" or about 10 seconds on non-LED handset models.
7. Release the DOWN button.
8. Press and hold the DOWN button again until the desk lowers a little bit more, slightly rises, and stops.
9. Release the DOWN button.
10. Your desk is now ready to use.
To program up to four presets (on some models):
1. Use the up/down buttons to find a desired height.
2. Press "M" (·s· on some models) followed by a number 1-4.
Caution: Once a preset button is pushed, the desk will move to the programmed height.
If you encounter any issues with the desk's functionality, you may need to reset it. Unplug the power cord for 20 seconds, then plug it back in and follow the RESET procedure outlined in Step 6.
For further troubleshooting or if the error message persists, contact your seller for assistance.
Add New Comment