User Manual Q&AAnswer
Feb 28, 2025 - 10:01 PM
To install the ITC BAL-SS-1C-1622 MOD Leg System, follow these steps:
1. Disconnect power: Before starting the installation process, make sure to disconnect power to avoid any accidents.
2. Prepare the parts/tools needed: You will need a wall base and shim, vertical and horizontal legs, a table base, screws (not provided), and a power drill (not provided).
3. Safety precautions: Account for all parts and destroy all packing materials to prevent hazards to children. It is also recommended to add fuse protection to the positive (+) input.
4. Find a suitable wall: Locate a solid and secure wall to mount your MOD Leg system. Place the wall base against the wall and mark the xxxx holes. Pre-drill the marked holes and then xxxx in the base and shim (if using) using appropriate screws for the mounting substrate.
5. Install the vertical leg: Slide the vertical leg into the wall base. Use the handle on the side to tighten and secure the vertical leg.
6. Install the horizontal leg: Place the horizontal leg on top of the vertical leg and repeat the tightening process using the handle on the horizontal leg.
7. Attach the table base: Attach the table base to the table (customer provided) using appropriate screws for the substrate. Place the table on top of the horizontal leg and repeat the tightening process using the handle.
For further assistance or warranty information, you can contact ITC at 3030 Corporate Grove Dr. Hudsonville, MI 49426 or visit their website at itc-us.com.
Add New Comment