How do I set up the TOPKODAS PROGATE Cellular Gate Access Controller? (TOPKODAS PROGATE Cellular Gate Access Controller User Guide)

Answer

manuals.plus

Feb 28, 2025 - 09:46 PM

To set up the TOPKODAS PROGATE Cellular Gate Access Controller, follow these steps:

1. Insert a nano-SIM card and turn off PIN code requests.
2. xxxx in the GSM antenna.
3. Connect the power supply (AC 10-24 V 50 Hz ~ 200 mA max / DC 10-30 V 200 mA max). Note: The USB power supply is only for configuration and not sufficient to power the modem.
4. Call the module. The first caller will become the system administrator. The module will turn on the RELAY output for 2 seconds and store the caller's phone number in its memory. The caller will receive a greeting SMS with the module's IMEI. All calls from different phone numbers will be rejected.
5. Configure and control the module using one of the following methods:
- SERA2 configuration software via USB or internet remote: Download and install the SERA2 software from the provided link. Connect the controller to a computer using a mini USB cable. Launch the SERA2 software and make the desired configuration changes.
- SERANOVA web app: Access the free SERANOVA web app and log in. From there, you can administer users, control the system remotely, view system status, and receive push notifications for events.
- SMS commands: Use SMS commands to add/edit/delete users, set event filters, and control outputs. Refer to the full Installation & Programming manual for a list of SMS commands and their syntax.

For more detailed information on setting up and configuring the TOPKODAS PROGATE Cellular Gate Access Controller, please refer to the full Installation & Programming Manual available at the provided link.