How do I install the ITC 69770-FF-KK Nova Scene Light? (ITC 69770-FF-KK Nova Scene Light Instruction Manual)

Answer

manuals.plus

Feb 28, 2025 - 09:12 PM

To install the ITC 69770-FF-KK Nova Scene Light, please follow the steps below:

1. Disconnect power: Before installing, adding, or changing any component, make sure to disconnect the power source to avoid any hazards.

2. Account for all parts: To prevent any potential hazards to children, ensure that you have received all the necessary parts and destroy all packing materials.

3. Fuse protection: It is recommended to add fuse protection to the positive (+) input for added safety.

4. Determine installation location: Decide on the desired installation location and drill a hole for the wires. Align the light with the gasket in the wire hole and use the light to mark xxxx holes. Drill appropriately sized holes for mounting screws.

5. Wiring: Follow the wiring diagram provided in the instruction manual to wire the light to your system.

6. Sealant application: Feed the wires back through the hole and apply application-specific sealant in the specified circular areas both below and on top of the rubber. Ensure that the sealant does not block the heat sink channels.

7. Secure the light: Press the light onto the rubber gasket and xxxx it in place.

8. Bezel placement: Place the bezel on the light and push it until it snaps into place.

For further warranty information, please visit www.itc-us.com/warranty-return-policy or refer to the provided documentation (DOC #: 710-00147 • Rev A • 11/09/2022). If you have any additional questions or concerns, please contact ITC directly at 616.396.1355 or visit their website at itc-us.com.