Answer

Feb 28, 2025 - 09:09 PM
To charge the battery for the ClearClick QuickConvert 2.0 scanner, please follow these steps:
1. Locate the rechargeable lithium battery included with the scanner. If it's missing, check the very bottom of the box underneath the packing materials.
2. Remove the battery from its packaging and install it by itself in the battery compartment at the back of the scanner. Make sure the battery is inserted in the correct direction by ensuring the + and - sides of the battery line up with the markings shown in the battery compartment.
3. Before using the scanner for the first time, please charge the battery for at least 2-3 hours.
4. Use the included USB cable to plug the scanner into the included USB wall power adapter.
5. The blue LED next to the power button will illuminate when the battery is charging.
6. The LED will turn off when the battery is fully charged.
Please note that it is important to charge the battery fully before using the scanner for the first time to ensure optimal performance.
Add New Comment