User Manual Q&AAnswer
Feb 28, 2025 - 08:48 PM
To set the alarm on the Levenhuk Wezzer Tick H80 Clock-Thermometer, follow these steps:
1. Press the MODE button on the device.
2. Press the MODE button again and hold it for 3 seconds. The digits that are to be set will start flashing.
3. Use the UP or DOWN button to change the value of the flashing digits. The order of setting is as follows: Hours > Minutes > Snooze time.
4. Once you have set the desired values, press the MODE button to save the settings and exit.
To turn the alarm on or off, press the UP button.
Please refer to the user manual for more detailed instructions and illustrations.
Add New Comment