User Manual Q&AAnswer
Feb 28, 2025 - 08:44 PM
To connect your microphone and instrument to the AUDIBAX Roma 120 Go PA System, follow these steps:
1. Locate the Channel Input section on the PA system. It is labeled as "Analog input for connecting microphone and instrument (XLR) cables."
2. Use an XLR cable to connect your microphone to the XLR input of the PA system. The XLR input is typically used for microphones and has three pins.
3. If you want to connect an instrument, such as a guitar, use a separate XLR cable to connect it to the XLR input of the PA system.
4. Once your microphone and instrument are connected, you can adjust their individual volume levels using the Volume Control knobs on the PA system.
5. Additionally, you can adjust the high-frequency balance of your microphone or instrument using the Treble Control xxxx and the low-frequency balance using the Bass Control xxxx .
6. Finally, adjust the overall output level of the speaker system using the Master Control xxxx .
Please refer to the AUDIBAX Roma 120 Go PA Systems User Manual for more detailed instructions and illustrations on connecting and using the PA system.
Add New Comment