How do I install the luminii Plexineon Fixture Catenary Mount Static Color? (luminii Plexineon Fixture Catenary Mount Static Color Instruction Manual)

Answer

manuals.plus

Feb 28, 2025 - 08:41 PM

To install the luminii Plexineon Fixture Catenary Mount Static Color, please follow these steps:

1. Ensure that all 24VDC wires are present within 72 inches of the installation, as specified in the power supply installation instructions.

2. It is recommended to have more than one person for the installation.

3. For multi-piece frames, connect the frame members together using the mounting frame joiner and secure the connection with locknuts.

4. Install the plexineon fixture onto the mounting clips on the mounting frame(s) using the following steps:
A.1 Use the mounting clip installation tool to create a U shape and insert two edges into the mounting clip.
A.2 Place the plexineon fixture inside the U shape and push it into the clip.
A.3 Remove the tool and ensure that the mounting clip is securely clipped onto the grip.

5. Install the catenary mount using the following steps:
3.1 Unscrew and remove the uchain from the turnbuckle.
3.2 Calculate the points for the turnbuckles on the mounting frame and set the uchain to the measured place.
3.3 xxxx the bolt back into the uchain to lock the turnbuckle with the mounting frame, securing the position with the set xxxx . Note that catenary cables with a maximum diameter of 1/4" are provided by others.

6. Install the catenary cable using the following steps:
4.1 Loosen the locknuts to remove the U-bolt.
4.2 Place the catenary cable between the saddle and U-bolt.
4.3 Use locknuts to clamp the catenary cable between the saddle and U-bolt. Repeat this step for all rope clips.

7. After installing the plexineon fixture with the catenary cable, adjust the length by rotating the middle part of the turnbuckle. Note that the turnbuckle is adjustable up to 2.5" vertically.

8. Connect the +24 VDC strip color wire from the Plexineon to the power supply's +24 VDC red wire.

9. Connect the -24 VDC solid color wire from the Plexineon to the power supply's -24 VDC black wire.

10. If installing multiple fixtures, repeat the installation steps accordingly.

Please note that the information provided here is a summary of the installation instructions. For complete and accurate instructions, refer to the luminii Plexineon Fixture Catenary Mount Static Color Instruction Manual.