User Manual Q&AAnswer
Feb 28, 2025 - 08:35 PM
To set the DMX address for the AUDIBAX Bar 234 RGBBar RGB 36 Inch LED Light, you need to refer to the manual. The manual provides different DMX channel modes and their corresponding DMX values for setting the address.
In the 2CH mode (A001), the DMX channel is set using the DMX value. The DMX value ranges from 001 to 512. To set the DMX address, follow these steps:
1. Press the MENU button on the remote control or the device itself to enter the menu mode.
2. Use the UP and DOWN buttons to navigate through the menu options and find the DMX address setup.
3. Once you have found the DMX address setup option, use the INC and DEC buttons to increase or decrease the DMX value.
4. Set the desired DMX value for the address you want to assign to the LED light.
5. After setting the DMX address, wait for 3 seconds, and the state will be automatically saved.
Please note that the specific DMX channel modes and their corresponding DMX values may vary depending on the mode you choose (2CH, 3CH, 4CH, etc.). Refer to the manual for the specific DMX channel mode you are using and follow the instructions provided.
It is important to read the manual thoroughly before using the product to ensure proper setup and operation.
Add New Comment