User Manual Q&AAnswer
Feb 28, 2025 - 08:32 PM
To connect the AUDIBAX Detroit 1000X DSP 12 Inch Subwoofer to your audio system, follow these steps:
1. Identify the input options on your subwoofer. The subwoofer has the following input options:
- CH1/CH2/CH3 XLR Input: Balanced XLR input for getting signals from mixers or preamplifiers.
- CH4 L/R Jack Input: Balanced L/R Jack input for getting signals from mixers or preamplifiers.
- CH4 Aux Input: Balanced Aux input for getting signals from mixers or preamplifiers.
2. Determine the output options on your audio system. You will need to connect the audio system's output to one of the subwoofer's input options mentioned above.
3. Use the appropriate cables to connect the audio system's output to the subwoofer's input. For example, if your audio system has XLR outputs, use XLR cables to connect the audio system to the CH1/CH2/CH3 XLR Input on the subwoofer. If your audio system has L/R Jack outputs, use L/R Jack cables to connect the audio system to the CH4 L/R Jack Input on the subwoofer.
4. Ensure that the power switch on the subwoofer is turned off before making any connections.
5. Once the connections are made, turn on the power switch on the subwoofer.
6. Adjust the volume levels using the various volume controls on the subwoofer, such as CH1/CH2/CH3/CH4 VOL, Master VOL, Treble VOL, Bass VOL, and Effect VOL.
Please refer to the user manual for more detailed information on the connections and controls of the AUDIBAX Detroit 1000X DSP 12 Inch Subwoofer.
Add New Comment