Answer

Feb 28, 2025 - 08:14 PM
Sure! Here is a step-by-step guide on how to install the FOTILE EA06C Island Cooker Hood:
1. Determine the installation area: The cooker hood should be installed on the roof for the fixed mounting rack. Make sure you have a suitable ceiling board in place.
2. Adjust the height range: The range hood should have an adjustable height range from the ceiling board. Ensure that the height is suitable for your kitchen setup.
3. Check the adjustable range: There should be an adjustable range allowed between the ceiling board and the installation roof. Make sure the range is within the specified limits.
4. Measure the deviation distance: Measure the deviation distance among the center lines for the hob burner, the range hood, and the roof mounting hole. This is important for proper alignment during installation.
5. Determine the height range: Measure the height range from the ground to the ceiling board that is adaptable to the range hood. Ensure that the height is suitable for your kitchen setup.
6. Measure the height range to the roof: Measure the height range from the ground to the roof that is adaptable to the range hood. Make sure the height is suitable for your kitchen setup.
7. Follow the manufacturer's instructions: Refer to the installation instruction manual provided by FOTILE for specific details and diagrams on how to install the EA06C Island Cooker Hood. The manual will provide step-by-step instructions, including any necessary tools or additional components required for installation.
It is important to note that installation requirements may vary depending on your specific kitchen setup and local building codes. If you are unsure or have any concerns, it is recommended to consult a professional installer or contact FOTILE customer support for assistance.
Add New Comment