User Manual Q&AAnswer
Feb 28, 2025 - 11:07 AM
To replace the remote control/power switch with a manual on/off switch on the handwarmer (PN5136) from Power Soccer Shop, follow these steps:
1. Remove the 24VDC power switch from the battery.
- Locate the existing power switch connected to the battery and disconnect it.
2. Connect the new power harness to the battery and connect it to the new on/off switch.
- Take the new power harness and connect it to the battery terminals, ensuring a secure connection.
- Connect the other end of the power harness to the new on/off switch.
3. Mount the on/off switch to the handwarmer mounting plate.
- Find a suitable location on the handwarmer mounting plate to mount the on/off switch.
- Use screws or other appropriate mounting hardware to secure the switch in place.
4. Plug the on/off switch into the heater box.
- Locate the socket on the heater box where the on/off switch should be plugged in.
- Insert the plug of the on/off switch into the socket firmly.
5. Assembly complete and ready to go.
- Once all the connections have been made and the on/off switch is securely mounted, the assembly is complete.
- You can now use the manual on/off switch to control the power of the handwarmer.
Please note that this answer is based on the provided instructions for replacing the remote control/power switch with a manual on/off switch on the handwarmer (PN5136) from Power Soccer Shop. It is always recommended to refer to the specific product manual for accurate and detailed instructions.
Add New Comment