Answer

Feb 28, 2025 - 11:02 AM
To properly install the furniture tipping restraint for the Appliances Connection 8063WWPNE Rhone Accent Chest, please follow these step-by-step instructions:
1. Attach one of the mounting brackets (01) securely near the top back edge of the furniture piece by inserting the xxxx (04). Refer to picture A in the manual.
2. Determine the final position of the furniture piece and mark the location on the wall, approximately 1" below the bracket mounted to the back of the furniture.
3. If a wall stud is available, drill a starter hole into the wall stud. If a wall stud is not available, drill a hole into the wall and insert a plastic anchor. Gently tap the anchor until the flange of the anchor (05) is flush with the wall.
4. Attach the second bracket (01) by inserting and securing the xxxx (03) to the wall. Refer to picture B in the manual.
5. Align the two brackets.
6. Thread the strap (02) through both brackets and tighten until snug.
7. Check to make sure that the brackets are firmly installed and the strap is secured.
Please note that this furniture tipping restraint is a deterrent and not a substitute for proper adult supervision. It is highly recommended to mount the restraint to a wall stud for maximum stability and protection against tipping.
Add New Comment