User Manual Q&AAnswer
Feb 28, 2025 - 10:59 AM
The RODE Wireless Go II microphone comes pre-paired out of the box, so you don't need to manually pair the transmitter and receiver. However, if you need to pair them again for any reason, follow these steps:
1. Press and hold the "Link" button on the receiver for 3 seconds.
2. The signal strength icon on the receiver's screen will start flashing.
3. Single press the power button on the transmitter (TX).
4. The transmitter and receiver should pair immediately.
Please note that the transmitter and receiver should be within range of each other for successful pairing. The "Link" LED on the transmitter will turn solid once the pairing is established.
For more detailed information and troubleshooting, please refer to the user guide provided with the RODE Wireless Go II microphone.
Add New Comment