Answer

Feb 28, 2025 - 10:57 AM
To assemble and install the Kogan KALED50XU9220STE 50 Inch Smart HDR 4K LED TV, follow these steps:
1. Stand assembly:
- Attach the stands to the base of the TV, ensuring that the 'L' and 'R' markings on the TV and stands match.
- Insert two M4 x 20mm screws for each stand and use a Phillips head screwdriver to secure them.
2. Remote control assembly:
- Open the battery compartment cover on the back side of the remote control.
- Insert two AAA size batteries, making sure to match the polarity markings (+ / -) of the batteries with the diagram inside the compartment.
- Replace the battery compartment cover.
3. Connect to antenna:
- Connect an antenna cable (not supplied) to the 'ANT' input port at the back of the TV.
- Ensure the antenna cable is also connected to a working antenna, either via an antenna wall socket in your home or directly.
4. Turning TV on:
- Plug the power cord into a suitable power outlet.
- Press the POWER button on the remote control, making sure to aim it at the sensor at the front of the TV. Alternatively, you can press the power button on the lower side of the back panel on the TV.
5. Turning TV off:
- Press the POWER button on the remote control to enter standby mode. To power down the TV completely, unplug the power cord from the power outlet.
For more detailed instructions and information, please refer to the complete user guide available online at help.kogan.com.
Add New Comment