Answer

Feb 28, 2025 - 10:51 AM
To install the Bodet BTX8020 Set Multi Sport Scorer, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Electrical Installation:
- The scoreboard must be powered through the building's electrical installation.
- Ensure that the electrical installation complies with the rules and standards in force in your country.
- Provide a mains power supply protection compliant with CEI 61643 if necessary.
- Install a differential circuit breaker max. 30mA / phase-neutral of 16A maximum, upstream from each power supply line.
- Connect the conductors on the same circuit close to the terminal block to avoid reduced isolation.
2. Mechanical Installation:
- Wall Mounting: Attach the scoreboard to the wall using 4 screws Ø8 mm and suitable wall plugs.
- Post Mounting: Pour two blocks of concrete for the two posts using the provided jigs. Seal the anchor bolts in each block and tighten the nuts. Attach the panel on the posts using clamps and threaded rods.
3. Electrical Connection:
- Connect the scoreboard's power supply to a mains outlet.
4. Commissioning:
- Depending on the installation type (HF or Wired), follow the instructions in the manual to configure the communication between the Scorepad keyboard and the BTX8020 SET scoreboard.
5. Dip-Switch Settings:
- If you are using multiple BTX8020 SET scoreboards, refer to the "Bodet scoreboard installation guide" for dip-switch settings.
For more detailed instructions and illustrations, please refer to the Bodet BTX8020 Set Multi Sport Scorer Instruction Manual provided with the product.
Add New Comment