User Manual Q&AAnswer
Feb 28, 2025 - 10:43 AM
To adjust the brightness and color temperature of the Magno Lumina Max Floor lamp using the remote control, follow these steps:
1. Ensure that the lamp is connected to the power supply using the included power supply adapter.
2. Point the remote control towards the lamp and make sure there are no obstructions between the remote control and the lamp.
3. Press the "On/Off" button on the remote control to turn on the lamp.
4. To increase the brightness, press the "Bright" button. Each press will increase the brightness level by one step. There are a total of five brightness levels available.
5. To decrease the brightness, press the "Bright " button. Each press will decrease the brightness level by one step.
6. To increase the color temperature, press the "Color+" button. Each press will increase the color temperature by one step. There are a total of five color temperature levels available.
7. To decrease the color temperature, press the "Color" button. Each press will decrease the color temperature by one step.
8. If you wish to set a specific brightness level, you can use the "Set Brightness" buttons. Press the corresponding button for the desired brightness level (20%, 50%, or 100%).
9. The remote control also provides preset options for different color temperatures. Press the "Warm" button for warm light (3000K), the "Cool" button for cool light (6500K), or the "Mix" button for approximately 4500K.
10. To turn off the lamp, press the "On/Off" button on the remote control.
Please refer to the product manual for additional information and troubleshooting steps. If you encounter any issues that cannot be resolved, it is recommended to contact the manufacturer for further assistance.
Add New Comment