How do I install and set up the LLOYD'S Magnetic Sensor? (LLOYD'S Magnetic Sensor User Guide)

Answer

manuals.plus

Feb 28, 2025 - 09:41 AM


To install and set up the LLOYD S LC-1196 Magnetic Sensor, follow these steps:



1. Make sure your smartphone has iOS 10.0 or higher or Android™ 4.4 or higher. Also, ensure that you are connected to a 2.4 GHz Wi-Fi channel.



2. Download the Lloyds Smart app from the App Store or Google Play, or scan the QR code provided in the manual with your smartphone.



3. Launch the Lloyds Smart app and click on "Sign Up" to register. Agree to the terms, choose your country, enter your email address, and click on "Get Verification Code". Enter the code sent to your email and set a password. If you already have an account, you can log in directly.



4. Open the Lloyds Smart app and select the "+" symbol in the upper right corner. Choose the "Security" category and then click on "Alarm system".



5. Enter your Wi-Fi network information and password, and click on "Next". Open the sensor cover and remove the insulating plastic to activate the battery. Press the reset button on the sensor for 5 seconds until the LED light blinks rapidly. Confirm the blinking LED light in the app and click on "Next".



6. Once the device is configured, you can change its name if desired and click on "Done".



Note: Make sure to enter the correct Wi-Fi password and keep the device close to the modem during the setup process.



After completing the setup, you can monitor the LLOYD S LC-1196 Magnetic Sensor through the app from anywhere as long as you have an internet connection.