User Manual Q&AAnswer
Feb 28, 2025 - 06:32 AM
To connect the Summerset TRL 44 Inch Deluxe Freestanding Grill to a natural gas supply, please follow these steps:
1. Ensure that the grill is designed for use with natural gas. Check the rating plate on the grill to confirm.
2. Make sure you have a qualified professional perform the required plumbing for the gas supply. This is important for safety and to ensure proper installation.
3. Check the gas supply line and make sure it is sized to accommodate the total BTU requirements of all the gas-fired equipment that will be connected to it.
4. Connect the grill to the natural gas supply using a gas line. Use a gas line with a minimum diameter of 1/2" inside diameter or 1" outside diameter.
5. Use a pressure regulator to regulate the gas pressure. The regulator should be installed between the gas supply line and the grill.
6. Follow the instructions in the manual for connecting the grill to the regulator and gas supply line. Make sure all connections are secure.
7. Once the grill is connected, perform a leak test. Create a soapy water solution of 1 part soap and 3 parts water. Apply the solution to all connections and fittings. If bubbles appear, there is a gas leak. Turn off the gas supply and tighten the loose joint or replace the faulty part before using the grill.
8. Once the leak test is complete and there are no leaks, you can proceed to light the grill following the instructions in the manual.
Please note that these instructions are a general guide and it is important to consult the specific instructions provided in the Summerset TRL 44 Inch Deluxe Freestanding Grill Instruction Manual for detailed and accurate information on connecting the grill to a natural gas supply.
Add New Comment