User Manual Q&AAnswer
Feb 28, 2025 - 06:29 AM
To install the RiTTO RGE2057100 REG Power Supply, please follow the steps outlined in the installation guide provided with the product. Here is a step-by-step guide:
1. Ensure that the installation is carried out by skilled professionals who have profound knowledge in connecting to installation networks, connecting electrical devices, laying electric cables, and adhering to safety standards, local wiring rules, and regulations.
2. Mount the power supply on a TH 35/7.5 or TH 35/15 standard DIN rail. Make sure not to cover the ventilation holes.
3. Do not exceed the maximum cable length between the power supply, the REG bus filter, and the system components. Refer to the table provided in the installation guide for the specific maximum cable lengths based on cable groups.
4. If using the power supply to supply additional system components, consider the maximum cable lengths provided in the installation guide.
5. Ensure that the power supply is installed at a safe distance from the 230V line. Keep a distance of at least 4 mm between the individual wires of the 230V line and the 24V SELV wire.
6. Fix the input cables (L, N) with a cable tie.
7. Refer to the wiring diagrams provided in the installation guide for the specific configuration you require.
8. Take note of the technical data of the power supply, including input voltage, output voltage, rated current, and rated power.
9. Consider the environmental conditions for installation, such as ambient temperature, humidity, and maximum height above NN.
10. The power supply has a connection terminal with a clamping range for output conductors. Make sure to use the appropriate conductor diameter and follow the nominal torque specifications.
11. The device complies with the IP30 protection class if installed in a distribution cabinet with at least IP30.
For further information and detailed instructions, please refer to the RiTTO RGE2057100 REG Power Supply installation guide provided with the product.
Add New Comment